|
|
|
HVT
30-Caliber Rifle
Suppressor Featuring
the patented Gemtech Quik-Mount Mounting System or traditional thread
mounting
|
|
 |
A shorter, lighter, more efficient suppressor for 7.62x51mm and .300 WM rifles,
the Gemtech HVT sets the bar for endurance and reliability. It is offered in
either threadmount or maintenance-free Quick-Mount fast attach configurations.
The HVT has an unusually quiet sound signature that is indistinguishable from,
and masked by, the bullet flight noise, making it ideal for both urban and rural
tactical operations. Recoil and visual signature (flash, dust) are reduced
greatly along with the audible signature.
With our high-accuracy / low-blowback
baffle design that the U.S. Navy deemed “highly favorable” in limiting
rate-of-fire increase, the HVT makes for an excellent choice on
automatic rifles as well as bolt-action precision rifles. |
|
The Gemtech Quick-Mount
attachment system permits consistent mounting with repeatable accuracy.
The male mount is torqued into position over a threaded barrel to assure
utmost accuracy, and the suppressor affixes over with a simple,
one-handed movement with no gates, latches, or threads to stick or
fumble. It’s either on, or it’s off. There are no “Is it on where it
should be?” questions with the Quick-Mount.
While the Quik-Mount retains
backward compatibility with the original Bi-Lock flash hider mounting
system, the mount has been totally re-designed for limited or no
maintenance.
Quick-Mounts are
available in flash hider style to fit factory threading on M1A/M14,
AR10, HK417, and other AR-type automatic rifles, or in a tensioning
back-over-barrel mount for bolt action rifles. Thread Mounting units are
available in 5/8-24 or M18x1 configurations. |
 |
|
QUIK-MOUNT OPTIONS:
The Quik-Mounts muzzle adapters are
the patented Bi-Lock flash-hider/mounts and are torqued into position to assure
utmost accuracy. Additional
Bi-Lock mounts are available in order that the HVT suppressor may be used with multiple
.30 caliber rifles.
.
 |
The phantom style flash hider
style bi-lock mount provides outstanding flash suppression and is most
popular on semi-automatic tactical rifles. Mounts are threaded 5/8-24. Also
available is a Phantom style flash hider mount specifically for the M1A/M14
rifle. |
|
The barrel tensioning style
bi-lock mount telescopes back over the barrel to tension the critical distal
2 inches of the barrel against a square shoulder to provide utmost accuracy.
This is the most compact mount, with the crown at the far end of the
bi-lock. Muzzle tensioning is a proven accuracy enhancing technique. Mounts
are threaded 5/8-24. |
THREAD MOUNT OPTIONS:
Thread mounting
HVT suppressors normally are threaded 5/8-24, an industry standard. On special
order, the thread mount version HVT can be supplied with metric M18x1 threads found on a number of
European rifles.
SUBSONIC AMMUNITION:
Subsonic ammunition utilizing heavy, boat-tail projectiles do not stabilize adequately to avoid baffle contact in barrels with a twist rate slower
than 1 turn in 8 inches. This ammunition is used at the owner's risk, and damage
caused by subsonic ammunition is not covered under warranty.
|
|
Physical
Specifications:
| O.A. Length
(Thread mount) |
8.25 inches (210 mm) |
| Caliber |
.308
(7.62mm NATO) |
| O.A. Length
(Quik-Mount) |
9.1
inches (235 mm) |
| Diameter |
1.5
inch (38 mm) |
| Weight
(Thread mount) |
24
ounces (680 gm) |
| Weight
(Quik-Mount) |
28
ounces (795 gm) |
| Materials |
Stainless
steel |
| Finish |
Optically
flat black oxide |
| List
Price (Thread Mount) |
$735.00 |
| List
Price (Quick Detach) |
$865.00 |
| Extra
Quik-Detach Mounts |
$90.00 |
|
M1A/M14 Quik-Detach Mount |
$150.00 |
|
|
|
Copyright © 2007 Gemini Technologies, Inc.
|
|
